I bought back in March 2000 – not realising then quite how integral it would become in my day-to-day and my identity (online).

10 years ago the internet was still relatively unused by the masses, but nowadays business are beginning to push their IT to internet outsourcing specialist companies via cloud computing thanks to internet speeds and cheaper storage.

Slightly unimaginable to the dial-up culture we had even just a few years ago.

The price of WebHosting has always been exponentially higher in the UK than the USA and so moved to live in a Data Center in Florida for 10 years, soaking up the sun, partying, trying to avoid ‘tropical’ computer viruses and hiding under the desks when hurricanes blew through.

But finally, the hosting company I’ve always used (and were always best value for money) have opened up a datacenter in the UK and have closed the gap in hosting fees. It’s still marginally less value than what you get in the USA, but it’s still more than I can use and as it’s so much faster being local in the UK, that’s good enough for me 🙂

So on the 28th of May, packed it’s bags, bought some woolly jumpers and on the 29th (circa 16:00) it came home and is now living in a plush brand new box in a secret location somewhere in London.

You may notice (if you’ve visited before) that the site is much more responsive now that it doesn’t have to travel 6,000 miles before splatting itself all over your screens …… [maybe I should rephrase that?]

Welcome home my wee site … Take your sandals off, I’ll get the kettle on 🙂

For those that don’t know what maximum flash sync speed is, put a flash on your camera, in Speed or Manual mode set it to 1/400s and take a shot. You’ll see that half the frame (usually the bottom) is darker than the top.

This is where the shutter is passing the sensor too fast for the flash and it closes during the flash fire.

Up until recently, the only cameras that were capable of high-speed sync were Medium Format digital cameras (e.g. Hasselblad) that cost £10+K. Medium Format cameras have a different shutter system (usually in the lens) and so the sensor is exposed to the image in a different way.

In the older film days, 35mm cameras had a maximum sync speed of about 1/60s …. which was a bit naff.
It’s only until fairly recently the maximum you could achieve with increased to 1/250s with Nikon and 1/200s with Canon.

Although this was much improved over the old systems, it was still limiting to what you could do in broad daylight.

Then Nikon brought out what they call “Auto FP High-Speed Sync” and Canon call “High Speed Sync”.

This allows the camera to fire a speedlight multiple times as the shutter curtain passes the sensor which ‘paints’ the images onto the sensor at much faster shutter speeds.
It basically makes the flash last a bit longer so that it gets all the image lit right to the bottom

The cost for this is a bit of power.

Where your flash may be outputting F22 @1m at full power, if you increase the shutter to, say, 1/2000, you’re Aperture will need to drop to a lower value (F8?) to maintain the same exposure.

This in itself is amazing and the fact that modern strobes like the SB800 and SB900 (and Canon EX580?) can cope with this is phenomenal and opens up a lot more possibilities with your photography. It kills the batteries, but that’s why we keep spares handy ;)

However, there are 2 drawbacks to this.
1) The camera has to be able to communicate to the flash to do this. Either in the hotshoe, using a remote hotshoe cable, or with some cameras, with the built in flash can talk to the speedlights
2) As mentioned above, there’s a power loss when increasing the sync speed beyond the native 1/250 sync as the flash has to increase it’s duration

So to increase the power you need more powerful lights than your speedlight, but you can’t make Studio Strobes sync faster than 1/250s ….. or can you ?

The answer is Yes.
Better than that, there’s 3 ways of doing it :)

The expensive way to do it is to use a PocketWizard MiniTT1 and FlexTT5 triggers to do this. But at approximately £225 each, its not cheap.
It will let you sync up to approx 1/500s (so I’m told) which is better, but not quite in the 1/5000s area.

In a light controlled area (e.g. a studio) use the flash to set the shutterspeed, not the camera.
The flash duration of a studio strobe varies on the make/model, but in all cases the duration is shorter(faster) at the lower power output than at full power. e.g the flash duration of an Elinchrom Ranger head can reach up to 1/6000s

This is the duration of the light emitted from the flash and in a light-tight room will be the only light source, so anything photographed will be at the flash’s duration speed rather then the one set in-camera.

To set up a high-speed shot, black out a room and set your camera to the correct ISO and f/stop for the power set on the srobes.
Set a long camera exposure (e.g. 2-20 seconds) and take a test shot with no flash.
If there’s any hint of an image then there’s ambient light from somewhere. Find it – block it.
To do the live shot you must manually trigger the strobes during the exposure …. and there you have it, high-speed sync.

The on-location way to do it is to use your existing speedlight (SB800 or SB900) to blip the light and set your studio strobe to be optically slaved and it will fire with the speedlight, but giving much more power than the speedlight could dream of.

The downside of this is that the flash needs to reach the Studio head which should be fine up to a point, but if you have remote lights beyond range or around corners, then the PocketWizards will be required

Below is a pictorial example of how to achieve High Speed Sync with just 1 speedlight and studio flashes.
NOTE: The studio lights are set to their lowest power setting throughout and my Nikon D700 is set to AutoFP on

1st shot – ambient light

Ambient. 1/13 @ f/7.1 @ ISO6400

I hook up an Elinchrom Skyport trigger as the BXRi has a built in receiver.

Ambient. 1/40 @ f/3.2 @ ISO6400

Pow!!! These things kick out some light…

Wireless Skyport. 1/200 @ f/8 @ ISO400

Switch off the Skyport and set the camera to a ‘flash’ setting and take a shot to show that no ambient is showing

Ambient. 1/250 @ f/11 @ ISO400

Switch the Skyport back on and … Half decent exposure. Notice the bottom edge of the frame is a bit dark. Looks like the Skyport/Elinchrom combination is not quite 1/250s which is a surprise. 1/200s will be fine though

Wireless Skyport. 1/250 @ f/11 @ ISO200

Increase the shutter speed to 1/400 and there’s the typical sign that we’ve exceeded the sync speed

Wireless Skyport. 1/400 @ f/11 @ ISO200

So lets try a PC Sync cable to see if that’s better

Ambient. 1/40 @ f/2.8 @ ISO6400

Looks fine at 1/200s. Let’s up it to 1/250s to see if we get the dark area at the base of the frame again

Sync Cable. 1/200 @ f/11 @ ISO200

….. Nope – it looks fine. The wire connection is fine at 1/250s. The wireless must be a bit sluggish

Sync Cable. 1/250 @ f/11 @ ISO200

Bump it to 1/400s and there’s the clipping of the frame again. Interesting that it’s much lower than using the Wireless trigger due to the immediacy of the hard wire connection

Sync Cable. 1/400 @ f/11 @ ISO200

Time to try the speedlight. Ignore the settings in this picture
It was actually set to [TTL][BL][FP] for the next shots

Ambient. 1/160 @ f/2.8 @ ISO6400

Ambient shot at much lower settings. The speedlights pack a much lower punch so need to adjust down accordingly

Ambient. 1/200 @ f/2.8 @ ISO400

Flash switched on and ….. not too bad

SB900 TTL FP. 1/200 @ f/4 @ ISO200

1/250s is showing clean edge to edge illumination

SB900 TTL FP. 1/250 @ f/4 @ ISO200

Ramped it up to 1/800 and it’s still lit fine, but notice the slight warmer colour shift

SB900 TTL FP. 1/800 @ f/4 @ ISO200

Ramp it up to 1/4000s and it’s still popping away quite happily

SB900 TTL FP. 1/4000 @ f/4 @ ISO200

I now set the SB900 to manual and it’s lowest setting (1/128) as per the picture 6 up from here. It actually shows [M] [FP] to indicate that it’s in high-speed-sync mode.
The Flash hardly does anything to the image, but will easily trigger the BXRi optical slave….

SB900 M FP 1/128 power. D700 1/4000 @ f/4 @ ISO200

Set the optical slave on and ….. hey presto. Clean image at 1/250s

SB900 M FP 1/128 power. D700 1/250 @ f/11 @ ISO200

Bump it up to 1/800 and, although it’s darker in the top of the frame, the bottom section is lit.

SB900 M FP 1/128 power. D700 1/800 @ f/11 @ ISO200

Increase to 1/2000s and it’s still lighting it. Bare n mind this is the BXRi at minimum powerand the camera settings are 2 stops darker than when using the AutoFP with the SB900

SB900 M FP 1/128 power. D700 1/2000 @ f/11 @ ISO200

Increase the F stop to F4 rather than power up the strobe head

SB900 M FP 1/128 power. D700 1/2000 @ f/4 @ ISO200

Hardly any change when increasing it to 1/4000s

SB900 M FP 1/128 power. D700 1/4000 @ f/4 @ ISO200

And again virtually no change even though the camera is firing at 1/8000s
…. yes 1/8000s sync with a studio light :)

SB900 M FP 1/128 power. D700 1/8000 @ f/4 @ ISO400

So there you have it. The easy way to perform maximum sync speeds on your camera and still be able to use studio lighting to light your subject.
Any comments, please add them below 🙂


Twitter Feed

    No Items Available.